You bought a Garmin with VO2max. It has HRV, readiness, training effect and even Body Battery. Then you get off the bike after 90 minutes in zone 2 feeling like you got run over by a steamroller. The watch says “Productive.” Your legs say otherwise.

Something is off here, and it is not the watch. No sensor measures what you actually feel. That is exactly why the RPE scale (Rating of Perceived Exertion), created more than 60 years ago by Swedish scientist Gunnar Borg, a professor of psychophysics at Stockholm University, is still one of the most valuable tools any triathlete has. It costs nothing. It takes half a second. And it is often more accurate than data from your most expensive sensors.

What the Borg Scale Is

Borg developed two versions of the scale. The older one, running 6 to 20, was designed to track heart rate: multiply your rating by 10 and you get an approximate pulse. RPE 13 equals roughly 130 bpm, RPE 17 equals roughly 170 bpm. Simple arithmetic that worked better in the 1970s than it does today.

The newer version, CR-10 (Category-Ratio), is the one you will see in TrainingPeaks, Intervals.icu and most triathlon apps:

  • 0, complete rest
  • 2 to 3, an easy warm-up jog, conversation flows freely
  • 4 to 5, conversational pace, classic zone 2
  • 6 to 7, threshold pace, sentences get short, breathing deepens
  • 8 to 9, intervals, you can barely get a word out
  • 10, maximum, a 30 second sprint and that is all you have

Your subjective sense of effort is a signal no device captures precisely. HRV might say you are well rested. Heart rate might be low. But if your legs feel like lead and RPE hits 8 at a power that normally reads as a 5, you have a problem your watch does not see.

Why RPE Beats Heart Rate Alone

Three scenarios where heart rate misleads you:

Heat. You run intervals at 30°C (86°F). Heart rate climbs to 175 bpm at a pace that usually gives you 155. According to the watch, you are pushing VO2max. In reality, most of that extra work is going into thermoregulation, with blood diverted to the skin. RPE 7 in those conditions is not zone 4, it is zone 3 with a heat penalty.

Accumulated fatigue. Third hard day in a row. HRV reads green, the watch says recovered. But your legs scream after the warm-up. RPE at a “comfortable” power jumps from 4 to 6. That is classic RPE drift, and it warns of overreaching before any objective metric moves.

Caffeine and adrenaline. Race day. Coffee before the start, a gel with 200 mg of caffeine, cortisol running high. Heart rate in the warm-up sits 10 bpm above normal. The watch says you are going flat out. RPE says 5 and a bit. Without RPE, you would have gone out too hard on the first climb.

Research backs this up: sRPE correlates strongly with other load monitoring methods (heart rate zones, TRIMP, power), but Foster, who created the method, recommends rating a session within 30 minutes of finishing. That window is optimal. It avoids the recency effect, where the hardest final minutes get overweighted, while the session is still fresh in memory.

How to Put It Into Your Week

Rule one: one rating per session. Do not try to score every interval separately, that turns training into a spreadsheet exercise. Off the bike, after a run, after your last pool session, log a single number from 0 to 10.

Rule two: sRPE load. A simple formula proposed by Foster:

sRPE load = session duration (minutes) x RPE (0 to 10)

A 60 minute run at RPE 5 gives 300 units. A 180 minute ride at RPE 4 gives 720 units. Add them up weekly and compare week to week. A 10 to 15% rise is normal progression. A 30% spike puts you on the road to injury or a plateau.

Rule three: watch the trend, not single days. RPE drift at a constant, measurable training load (bike, trainer, anything you can quantify) is a warning sign. If the same threshold session, say 3×10 minutes at FTP, climbs from RPE 7 to RPE 9 over two weeks, you are not building fitness, you are digging a hole. Add a recovery day or cut volume by 30%.

When RPE Falls Short

The Borg scale is a contextual tool, not an absolute one. It has two weak points.

First, subjectivity in beginners. If you are in your second season, your “7” is not the same as a “7” from someone who has trained for 15 years. Beginners tend to rate every interval a 9, because they have a lower tolerance for discomfort. The scale calibrates with experience, but early on, pair RPE with heart rate and power.

Second, strict interval work. Studies show that RPE rated after a whole session tends to overestimate load at low intensity and underestimate it at very high intensity intervals. For a classic “VO2max 5×3 minutes” session, the recorded power from your Garmin tells you more than RPE does.

Verdict

RPE is not competition for your watch, it is the cheapest thing you can add to it. Your sensor measures what is happening in your body. RPE tells you what is happening in your head. Together, they give you the full picture.

If you train triathlon 8 to 15 hours a week and are not using RPE, you are probably overreaching or undertraining right now and simply do not know it yet. Open your training app of choice (TrainingPeaks, Intervals.icu, even a note in Google Keep), add an “RPE 0 to 10” field to every session. Thirty seconds a week gets you the load monitoring you would otherwise pay about $800 for in a top end multisport watch.

More on this: Max Heart Rate: Why 220 Minus Age Is Wrong. Racelify lists triathlons worldwide with dates and organiser links.